Skip to main content

Multiscale Computational Mechanics Laboratory

Publications

Full Pre-print PDFs of the journal articles are available below by clicking on the symbols. These journal articles are also available for download at the web sites of the publishers or by clicking the DOI numbers. All papers are copyrighted by either a publisher, our research group, or the authors. Publications available here are for educational or academic use only. All rights of reproduction or distribution in any form are reserved.

 

BOOK CHAPTERS AND JOURNAL SPECIAL ISSUES

  • C. Oskay, “Multiscale Modeling of the Response and Life Prediction of Composite Materials,” in Numerical Modelling of Failure in Advanced Composite Materials, P. Camanho and S. Hallett (editors), Woodhead publishing, ISBN: 978-0-08-100332-9, 2015
  • N. Rahbar, C. Oskay and H. Yin, “Special Section on Mechanics of Nanocomposites and Nanostructures,” ASCE Journal of Nanomechanics and Micromechanics, 3:36-36, 2013. DOI: 10.1061/(ASCE)NM.2153-5477.0000073.
  • C. Oskay, “Model Reduction Approaches in Multiscale Modeling of Heterogeneous Materials,” International Journal for Multiscale Computational Engineering, 11:vii-viii, 2013. DOI: 10.1615/IntJMultCompEng.2013005986.
  • C. Oskay and K. Matous, “Recent Advances in Computational Material Science and Multiscale Materials Modeling,” International Journal for Computational Multiscale Engineering, 8:vii-vii, 2010. DOI: 10.1615/IntJMultCompEng.v8.i5.10.

 

JOURNAL PUBLICATIONS

  • C. Prakash, I. Gunduz, C. Oskay and V. Tomar, “Effect of interface chemistry and strain rate on strain rate dependent particle-matrix delamination in an energetic material,” Engineering Fracture Mechanics, 191:46-64, 2018. DOI: 10.1016/j.engfracmech.2018.01.010

 

CONFERENCE PUBLICATIONS AND OTHERS

  • A. Faupel and C. Oskay, “Multiscale Modeling of Failure Mechanisms in Multidirectional Double-
    Edge Notch Compression Specimens ,” Proceedings of the American Society for Composites (ASC) 38th Annual Technical Conference, Boston, MA, September 17-20, 2023.
  • Z. Su and C. Oskay, “Achieving Mesh-Size Objectivity in Fatigue Damage Analysis in Laminated Composites,” Proceedings of the AIAA Science and Technology Forum and Exposition 2021 , Virtual Event, January 11-21, 2021.
  • X. Zhang and C. Oskay, “Uncertainty Quantification for Fatigue Nucleation in Titanium Alloy Microstructures,” Proceedings of the AIAA Science and Technology Forum and Exposition 2021 , Virtual Event, January 11-21, 2021.
  • A. Faupel and C. Oskay, “Modeling the compression-after-impact behavior of a Z-pinned composite laminate,” Proceedings of the AIAA Science and Technology Forum and Exposition 2021 , Virtual Event, January 11-21, 2021.
  • A. Fascetti and C. Oskay, “Performance-Based Design of Flood Protection Infrastructure,” Proceedings of the 2019 International Conference on Sustainable Infrastructure, Los Angeles, CA, November 6-9, 2019.
  • Z. Su and C. Oskay, “Prediction of Fatigue Failure in Fibrous Composites using the Reduced-Order Multiscale Discrete Damage Theory,” Proceedings of the SAMPE Conference, Charlotte, NC, May 20-23, 2019.
  • C. Oskay and C. Tian, “A New Approach to Alleviating Mesh Size Independence in Multiscale Fatigue Life Prediction in Composites,” Proceedings of the 33rd Annual American Society for Composites Technical Conference, Seattle, WA, September 24-26, 2018.
  • W. Paulson and C. Oskay, “Prediction of the Behavior of Composite Bolted Joints Using the Eigendeformation-based Reduced Order Homogenization,” Proceedings of the AIAA Science and Technology Forum and Exposition 2018, Kissimmee, FL, January 8-12, 2018.
  • W. Paulson and C. Oskay, “Failure Prediction of Countersunk Composite Bolted Joints using Reduced Order Multiple Space-Time Homogenization,” Proceedings of the 32nd Annual American Society for Composites Technical Conference, West Lafayette, IN, October 22-25, 2017.
  • M. Bogdanor, S. B. Clay and C. Oskay, “Damage Interactions in CFRP Composites under High Cycle Fatigue,” Proceedings of the 32nd Annual American Society for Composites Technical Conference, West Lafayette, IN, October 22-25, 2017.
  • X. Zhang and C. Oskay, “Sparse and Scalable Eigenstrain-based Reduced Order Homogenization Models for Polycrystal Plasticity,” Proceedings of COMPLAS XIV, International Conference on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 5-7, 2017.
  • X. Zhang, V. T. Phan and C. Oskay, “Microstructural Creep, Fatigue and Creep-Fatigue modeling of Nickel-based Superalloy Inconel 617 at High Temperature,” Proceedings of the High Temperature Reactor Technology (HTR) Meeting 2016 , Las Vegas, NV, November 7-10, 2016.
  • M. J. Bogdanor and C. Oskay, “Fatigue Life Prediction of IM7/977-3 Composite Laminates with Multispatial/Multitemporal Homogenization,” Proceedings of the AIAA Science and Technology Forum and Exposition 2016 , San Diego, CA, January 4-8, 2016.
  • M. J. Bogdanor and C. Oskay, “Application of Reduced Order Multiscale Homogenization to ‘Assess and Quantify the Benefits of Applying Damage Tolerant Design Principles to Advanced Composite Aircraft Structures,” Proceedings of the AIAA Science and Technology Forum and Exposition 2015 , Kissimmee, FL, January 5-9, 2015.
  • R. D. Crouch, C. Oskay and S. B. Clay, “Fast Life Prediction Model for Composites Based on Multiple Temporal Scale Homogenization,” Proceedings of the AIAA Science and Technology Forum and Exposition 2014 , National Harbor, MD, January 13-17, 2014.
  • C. Oskay and H. Yan, “Modeling the Coupled Transport-Deformation Response of Titanium Alloys Subjected to Thermo-Mechanical Environment,” Proceedings of the AIAA Science and Technology Forum and Exposition 2014 , National Harbor, MD, January 13-17, 2014.
  • M. J. Bogdanor, R. D. Crouch, S. B. Clay and C. Oskay, “Modeling Rate Dependent Damage Evolution in Composite Structures,” Proceedings of the 54th AIAA Structures, Structural Dynamics, and Materials, Boston, MA, April 8-11, 2013.
  • M. G. Pike, C. Oskay and F. Sanchez, “Multiscale Computational Methodology for the Mechanical Response of Nano- and Micro-Fiber Reinforced Cementitious Composites,” International US-Poland workshop on Multiscale Computational Modeling of Cementitious Materials (MCMoCM 2012), Cracow, Poland, October 18-19, 2012.
  • R. Crouch, C. Oskay and S. Clay, “Multiscale Modeling of Damage Accumulation in Carbon Fiber Reinforced Polymers Subjected to Fatigue,” Proceedings of the 53rd AIAA Structures, Structural Dynamics, and Materials, Honolulu, HI, April 23-26, 2012.
  • T. Hui and C. Oskay, “Computational Modeling of Polyurea Composites Subjected to Blast,” Proceedings of the NSF CMMI Research and Innovation Conference, Atlanta, GA, January 4-7, 2011.
  • C. Oskay, “A Multiscale Failure Model for Thin Heterogeneous Plates,” Proceedings of the American Society for Composites – 23rd Technical Conference, Memphis, TN, September 9-11, 2008.
  • C. Oskay and J. Fish, “A multiscale model of composite failure under impact,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5-10, 2006.
  • C. Oskay and J. Fish, “Multiscale modeling of heterogeneous materials with interface damage,” Proceedings of the 8th US National Congress on Computational Mechanics, Austin, TX, July 24-28, 2005.
  • C. Oskay and J. Fish, “A nonlocal multiscale model for fatigue,” Proceedings of the 8th US National Congress on Computational Mechanics, Austin, TX, July 24-28, 2005.
  • J. Fish and C. Oskay, “A Multiscale model for crash prediction of composite cars,” Research Report, USCAR Energy Management Research Group, February 28, 2005.
  • J. Fish and C. Oskay, “Multiscale analysis of interfacial debonding under impact,” Research Report, USCAR Energy Management Research Group, May 24, 2005.
  • M. Zeghal, T. Abdoun and C. Oskay, “A Novel Shape-Acceleration Array and Local Identification of Geotechnical Systems,” International Workshop for Site Selection, Installation and Operation of Geotechnical Strong-Motion Arrays: Inventory of Current and Planned Arrays, Los Angeles, CA, October 14-15, 2004.
  • C. Oskay, P. V. Kallou, M. Zeghal and T. Abdoun, “Visualization of the seismic response of soil systems,’’ Proceedings of the 1st International Conference on Physical Modeling in Geotechnics, St. John’s, Newfoundland, Canada, July 2002.
  • C. Oskay and M. Zeghal, “Identification of the dynamic response of soil systems,” Proceedings of the 15th ASCE Engineering Mechanics Division Conference, New York, NY, June 2-5, 2002.
  • T. Abdoun, C. Oskay, Y. Wang, C-J. Lee and M. Zeghal, “Visualization of measured quay wall seismic response,’’ Proceedings of the XVth International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey, August 27-31, 2001.
  • C. Oskay and M. Zeghal, “Identification and analyses of the deformation of soil systems subjected to seismic excitations,’’ Proceedings of the XVth International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey, August 27-31, 2001.
  • M. Zeghal, C. Oskay, M. K. Sharp and R. Dobry, “Visual interpretation of site dynamic response,’’ Proceedings of the 7th US-Japan Workshop on Earthquake Resistant Design of Lifeline Facilities and Countermeasures Against Liquefaction, Seattle, WA, August 15-17, 1999.